Electricians in Ogden, UT
Locally owned Ogden electricians, each checked against the same published standard. Below the list: Utah's licenses, when Ogden needs a permit, how a panel upgrade works with Rocky Mountain Power, and what Utah's code does and doesn't require.
No electricians listed yet. We're reviewing applications now and only list businesses that pass every check, so this page stays empty until one does.
Run a electrical business in Ogden? Apply for one of the ten slots.
What Utah requires of an electrician
An electrical contracting business needs a DOPL contractor license: E200, General Electrical Contractor, or E201, Residential Electrical. E201 covers services, panels, disconnects and grounding in homes. The electricians themselves are licensed individually as apprentice, residential journeyman, journeyman, residential master or master electrician. On residential jobs a licensed electrician can supervise up to three apprentices.
Utah's handyman exemption for jobs under $7,000 doesn't cover electrical work. That needs a licensed electrical contractor, or for a single component like an outlet, switch or fixture, a licensed journeyman electrician. Homeowners working on their own property are exempt from licensing.
Check any license in the state's Licensee Lookup and Verification System.
When Ogden needs a permit
Ogden City requires a permit to alter, change, extend, install, repair or replace an electrical system. New circuits, a panel replacement, a service upgrade and a hardwired EV charger are all new or changed electrical work. For an owner-occupied home the homeowner or a licensed contractor can pull the permit; for a rental it must be a licensed contractor. Ogden Building Permits and Inspections is at 2549 Washington Blvd, 801-629-8950.
Panel upgrades and Rocky Mountain Power
A panel or service upgrade involves the utility. Rocky Mountain Power's service rules say:
- Only its crews may physically disconnect your service. Customers and their contractors may not.
- Nobody but the utility may work on the meter.
- You should tell it before adding large loads, such as hot tubs, car chargers and heat pumps.
- A disconnect and reconnect carries a fee.
A good electrician handles that coordination and builds the outage into the schedule. Ask how long you'll be without power.
What Utah's code requires
Utah adopted the 2023 National Electrical Code, effective July 1, 2026, but homes are governed by the residential code as Utah amended it, and the amendments differ from what you'll read on national sites:
- Arc-fault (AFCI) breakers aren't required by Utah's residential code. Utah deleted those sections, including for extended or modified circuits. The statute is flagged for possible change in July 2027.
- Whole-house surge protection isn't required. Utah deleted that NEC section.
- Ground-fault (GFCI) protection is narrower. In basements it applies to unfinished areas, and in kitchens to the outlets serving countertops.
"Not required" isn't the same as "not worth it". Ask your electrician what they recommend for your house and why.
Older Ogden homes
The median Ogden home was built around 1969. The Consumer Product Safety Commission says homes wired between 1965 and the mid-1970s may have aluminum branch wiring, and that pre-1972 aluminum-wired homes are far more likely to have connections reach fire-hazard conditions. CPSC's advice is not to repair it yourself; the approved fix is done by electricians trained by the connector manufacturer. If your house is from that era and you see warm switch plates, flickering lights or a burning smell, call an electrician.
Batteries and EV chargers
Rocky Mountain Power's Wattsmart Battery program (changed June 15, 2026) pays $1,000 upfront for systems under 10 kW and $2,000 for 10 kW or larger, plus yearly credits. It doesn't require approved installers. The federal residential clean energy credit (25D) ended for 2026 work. For chargers, see our EV charger installation guide.
What electrical work costs in Ogden
We don't publish job prices, because we haven't found a dated local survey we'd stand behind. The Bureau of Labor Statistics puts the median wage for electricians in the Ogden area at $29.82 an hour (May 2025): what electricians earn, not what you're billed. Prices move with access (finished walls versus an open basement), whether the utility has to disconnect, the permit, and whether the panel has room for what you're adding.
How to choose an electrician
- Check for an active E200 or E201.
- Ask about the permit for anything beyond a like-for-like swap.
- For a panel upgrade, ask who coordinates with Rocky Mountain Power and how long the outage will be.
- Ask what they recommend beyond code, such as surge protection or AFCI, and why.
- Get it in writing, with the panel size and breaker list for larger jobs.
Every electrician listed here has been checked for a real Ogden-area address, local ownership, a Utah license and insurance. See how we vet.
Electrical questions
Can I do my own electrical work in Ogden?
In a home you own and live in, yes. Utah law exempts owners working on their own property from contractor licensing, and Ogden lets the homeowner of an owner-occupied home pull the permit. The permit and inspection still apply.
Can a handyman replace an outlet or light fixture?
Not an unlicensed one. Utah's handyman exemption for jobs under $7,000 says electrical work must be done by a licensed electrical contractor, or for a single component such as an outlet, switch or fixture, by a licensed journeyman electrician.
Who turns off the power for a panel upgrade?
Rocky Mountain Power. Its service rules say all physical disconnects are done by its own crews, and customers or their contractors may not disconnect the service or work on the meter. Your electrician coordinates the disconnect with Rocky Mountain Power.
Does Utah require arc-fault (AFCI) breakers?
Not under the residential code as Utah has adopted it. Utah's amendments delete the IRC and NEC arc-fault requirements, including for extended circuits. That statute is flagged for possible change in July 2027, and an electrician may still recommend them.
Is the federal tax credit for a panel upgrade still available?
No. The 25C credit, which covered panel upgrades up to $600, is not allowed for property placed in service after December 31, 2025.